Suburban Cargo Fit Measurement Record
Use this record beside the ItemFits Suburban tool and measurements of the actual vehicle. It records a fit check; it does not certify loading or safe carriage.
Scope: U.S.-market 2021+ Suburban generation; ItemFits uses researched dimensions for this generation; some dimensions are approximate and should be verified against the actual vehicle. Later years are not separately verified, and 7-, 8- and 9-seat layouts are not modeled separately. The two cargo settings are below. Both rear rows folded together are not modeled. Verify the actual vehicle, trim, accessories and seat positions.
| ItemFits Cargo Setting | Listed Floor Length | Published Cargo Volume |
|---|---|---|
| All seats upright | 38.2 in (ItemFits lists as researched) | 41.5 cu ft |
| Third row folded; second row upright | ~66 in (approximate) | 93.8 cu ft |
Tool reference checked September 15, 2026: itemfits.com/fit/vehicle/chevrolet-suburban. Values above are the tool's listed scope, not measurements of your vehicle. ~ marks an approximate value.
1. Actual Vehicle
Model year / trim / seating layout:
Second-row position / third-row position:
Cargo accessories or obstructions / date measured:
2. Item as Transported
Item and packaging:
Maximum length / width / height / unit:
Handles, feet or other projections included:
Permitted transport orientations / known or unknown weight:
3. Tool Inputs and Result
Tool date / vehicle and exact seat-setting label selected:
Physical seat state represented / source confirming it:
Dimensions and units entered / result and warnings:
Differences from actual vehicle or item:
Loading Path and Remaining Checks
Vehicle or record ID: ____________________ Measurement unit: __________
4. Restrictions Along the Route
| Restriction | Dimension and Unit | Measured / Published / Unknown | Source, Date and Photo or Note |
|---|---|---|---|
| Narrowest usable opening width | |||
| Opening height at relevant point | |||
| Sill, hatch shape or entry restriction | |||
| Usable floor length in actual seat state | |||
| Interior width and height at item location | |||
| Wheel wells, taper or seat hardware | |||
| Space for a turn or tilt after entry |
Opening and interior checks are separate; the tool does not simulate the full loading maneuver. A rectangular opening does not capture every restriction. Mark anything unmeasured as unknown; a blank is not clearance. Keep physical fit separate from load limits, cargo restraint and handling.
5. Remaining Decision
What appears to clear:
Unmeasured, tight or unclear restrictions:
Who can confirm / next verification step:
Created by Chevy Truck Expert. Editorial contact: editor@chevytruckexpert.com.